Jabra Engage 65/Engage 75 Setup With Computer

Find the Jabra Engage 75 here on Amazon!

Find the Jabra Engage 65 here on Amazon AND here on Headsets.com!

Set up:

1. Plug the power cable into the back of headset base then plug the other end into a wall outlet or surge strip.
2. Plug the headset's USB cord into the back of the headset base. There are two places to plug the USB cord, but we want the left one, directly to the right of the AUX port. It should be labeled with "PC".
3. Plug the bigger end of the USB into your computer, which should automatically install the headset
4. For Windows: Set this headset as the default device by right-clicking on the speaker in the bottom right corner of the screen and selecting "Open Sound Settings." From there set the Jabra headset as default device for both input and output.
5. For Mac: Head to the System Preferences by clicking the Apple button. Go to Sound. Set the Jabra headset as the default device for both the input and output.

To use your headset, just turn the headset on! You will automatically be put on Computer Mode. There is nothing to press on the headset base!

Dale Johnson

September 22, 2023

I had to update windows, when computer came back on the Jabra is now not working. It is connected via USB and the computer will not identify it. How do I get it working?
———
Headset Answers replied:
If you’ve already tried rebooting your computer and plugging your headset into a different USB port, then your next move would be to reach out to Jabra for further troubleshooting assistance. They can be reached at 1-866-697-8757. Hopefully, they can get you back up and running!