Jabra Engage 75/Engage 65 Wireless Headset Basic Functions

Turning headset on/off:

Press the silver circle on the side of the headset.

Adjusting volume:

Speaker volume: With the headset on, press the small bump above on/off button to increase your listening volume. To lower it, press the small bump under the on/off button.

Microphone volume: Press the menu soft button on the base (looks like 3 horizontal lines, lowest one a little pointed). It will say "Desk phone microphone" with a bar below. To increase, press the plus + button to the right. To decrease press the minus - button to the left.

Mute microphone: Press the small button located underneath the microphone tip. The headset will tell you the microphone is muted. You can also see a mute icon on the base. To turn off mute, press the same button.

Note: If wearing the Jabra wireless headset so that the microphone is on your left side, the mute button will be above the microphone tip.

Pairing a new microphone to the charging base:

Click here for full instructions

Docking: Place the new headset into the charge and it should pair automatically.

Pair without docking: Press the menu button under the screen until it says "Add headset." Scroll to the right using the plus button until it says "pair without docking" then hit the checkmark. When it goes into pairing mode, press and hold the on/off button on the headset until the headset says "pairing", then let go.

Time For A New Headset?

Many Jabra Customers have upgraded to the Leitner LH670.