Jabra 9450 Setup

Disclaimer: We no longer sell this headset, so we don't have much information aside from what's in this article. Hopefully, this gets you what you need!

Connecting to a desk phone will vary depending on the type of phone used. Here are a few different ways to get the Jabra 9450 connected to your phone.

OPTION 1

Desk phone with headset port

This type of desk phone has a dedicated headset port (usually at the back of the phone). These phones typically have a button on the front panel for switching between handset and headset.

• Plug the supplied telephone cable into the port marked with a blue telephone on the base
• Connect the telephone cable to the headset port on the desk phone

OPTION 2

Desk phone without a headset port

This desk phone does not have a dedicated headset port.

• On the desk phone, unplug the handset's curly cord from the phone.
• Connect the handset cable to the port marked with a grey telephone handset on the base.
• Plug the supplied telephone cable into the port marked with the blue telephone on the base.
• Connect the telephone cable into the handset port on the desk phone (where the handset and curly cord used to plug in).

OPTION 3

Desk phone with JABRA GN1000 remote handset lifter

The JABRA GN1000 remote handset lifter manually lifts the desk phone handset to answer a call. For mounting instructions refer to instructions supplied with the JABRA GN1000.

• On the desk phone, unplug the handset's curly cord from the phone.
• Connect the handset cable to the port marked with a grey telephone on the base
• Plug the supplied telephone cable into the port marked with a blue telephone on the base
• Connect the telephone cable into the handset port on the desk phone
• Connect the JABRA GN1000 cable into the red port marked AUX on the base

Time for a new headset?

Many Jabra headset users have switched to the Leitner LH670!