Note:The CA10 & CS10 have been discontinued for 5 years. Recommend a new OfficeRunner! :-)
You should not have to adjust the channel settings unless you experience cross talk. (Cross talk is noise from one telephone line that is audible on another line. It can occur when the bases are too close and on the same frequency.)
If you do experience cross talk, then adjust each unit to a different channel.
The channels are controlled by the 2 dials on the back of the CA10 / CS10. There are 39 possible channels. If the dial on the left is on 2 and the dial on the right is on 5, you are effectively at 25. So while the dials have 99 positions, any setting higher than 39 is effectively 39.
If the channel is set to “00” the unit will roam onto the first available channel. After adjusting the channel, you must turn the headset remote off and on again while it’s in the base to “reset” it to the current channel.
This is the internal support database for Headsets.com. We manufacture and sell office headsets in North America. With over 25 years' experience in the business, we know headsets.
Please use our support database for free headset support, whether you’re a Customer of ours (or not). If you have problems, suggestions, or unanswered questions, please email us at hello@headsets.com (compliments also welcomed 😀)
Looking for office headsets in the UK? Check out Headsets.co.uk.
This is the internal support database for Headsets.com. We manufacture and sell office headsets in North America. With over 25 years' experience in the business, we know headsets.
Please use our support database for free headset support, whether you’re a Customer of ours (or not). If you have problems, suggestions, or unanswered questions, please email us at hello@headsets.com (compliments also welcomed 😀)
Looking for office headsets in the UK? Check out Headsets.co.uk.
Questions/comments?