The HL10 attaches to the left-hand side of the phone, underneath the handle of the telephone Handset.
How does it attach to the phone? There are three strips of sticky tape located on the bottom of the lifter. These hold it securely to the phone.
There is one connector cord that stretches between the HL10 and the headset base station. This cord plugs into the bottom of the base in a jack located right next to where the DC Adapter plugs in. Be sure to push the HL10 connector cord plug into the bottom of the base so that it is very tight (should snap in place). Otherwise, it will not make a good connection and the HL10 will not work.
This connection is responsible for both powering and controlling the HL10.
This is the internal support database for Headsets.com. We manufacture and sell office headsets in North America. With over 25 years' experience in the business, we know headsets.
Please use our support database for free headset support, whether you’re a Customer of ours (or not). If you have problems, suggestions, or unanswered questions, please email us at hello@headsets.com (compliments also welcomed 😀)
Looking for office headsets in the UK? Check out Headsets.co.uk.
This is the internal support database for Headsets.com. We manufacture and sell office headsets in North America. With over 25 years' experience in the business, we know headsets.
Please use our support database for free headset support, whether you’re a Customer of ours (or not). If you have problems, suggestions, or unanswered questions, please email us at hello@headsets.com (compliments also welcomed 😀)
Looking for office headsets in the UK? Check out Headsets.co.uk.
Questions/comments?